1959-1967 US SPEC BUMPERS

VW produced US Spec bumpers from 1959-1967 on all buses imported to America. US spec bumpers are easily identified by the use of tubular over riders on both bumpers.  Please call us if you need assistance in determining the correct trim for your bus.




Deluxe Bumper Trim FAQ

We machine all of our trim is CNC machines from 6061 aluminum billet. We feel we can control the quality of the ends better than with an extruded and welded piece.

We machine all of our trim from 6061-T6 billet. We then anneal the completed parts to a T0 condition. This makes them as soft as the factory parts. 

We bend all our trim around jigs patterned off factory bumpers. However we make our bends slightly less than the original so the outer two trim bolts pull the ends in tight to the bumper. 

We don't drill any holes in the trim so you can position the hardware as you see fit. We do however drill the clearance holes in the pressed bumper trim to clear the bumper mount bolts.

Yes, we will make any type of trim you would like. We can make different profiles and lengths for custom applications. Please calls us with inquiries.

No. The two bumpers have different profiles. The US spec trim has to have a much greater relief cut on the back side to clear the "point" on the face of the bumper.

Yes we always welcome the opportunities to work with dealers. Please email us to discuss dealer pricing.